{"id":3577,"date":"2026-10-09T03:56:18","date_gmt":"2026-10-08T19:56:18","guid":{"rendered":"http:\/\/www.bafeivalveco.com\/blog\/?p=3577"},"modified":"2026-10-09T03:56:18","modified_gmt":"2026-10-08T19:56:18","slug":"what-are-the-glass-types-used-in-panoramic-elevators-4f51-28a2ba","status":"publish","type":"post","link":"http:\/\/www.bafeivalveco.com\/blog\/2026\/10\/09\/what-are-the-glass-types-used-in-panoramic-elevators-4f51-28a2ba\/","title":{"rendered":"What are the glass types used in panoramic elevators?"},"content":{"rendered":"<p>Hey everyone, Sarah here, and if you\u2019ve ever ridden a panoramic elevator, you know that part of the fun is being able to watch the world go by as you move up (or down) a building. But have you ever stopped to wonder what kind of glass makes those walls work? I\u2019m the owner of a panoramic elevator supply company, and I get this question all the time\u2014from architects, building managers, even random people at networking events who just saw our latest install at a downtown mall. Today, I\u2019m breaking down the glass types we actually use for these elevators, no fancy jargon, just the real stuff that matters for safety, clarity, and lasting performance. <a href=\"https:\/\/www.daelevator.com\/panoramic-elevators\/\">Panoramic Elevators<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.daelevator.com\/uploads\/48342\/page\/small\/modern-lifts-for-homese7e7a.jpg\"><\/p>\n<p>First off, let\u2019s get one thing straight: panoramic elevator glass isn\u2019t just regular window glass. If we used that, we\u2019d have a lot of broken elevators, or worse, people panicking every time it rained or a bird hit it. I\u2019ve seen too many cheap installs cut corners here, and they end up costing way more in repairs or liability down the line. So let\u2019s start with the most common one we spec: tempered glass. Wait, let\u2019s keep it real\u2014tempered is the workhorse, right? It\u2019s about 4 to 5 times stronger than ordinary annealed glass, and if it does break, it shatters into those tiny, pea-like pieces instead of sharp shards. That\u2019s non-negotiable for elevators, since they\u2019re moving constantly, carrying people, and sometimes in high-traffic areas where things (or people) bump into the walls.<\/p>\n<p>But not all tempered glass is the same for panoramic lifts. We usually go with heat-soaked tempered (sometimes called stress-relieved tempered) too. Why? Because regular tempered glass has a tiny risk of spontaneous breakage from nickel sulfide impurities trapped during manufacturing. Heat-soaking bakes the glass at a specific temperature for hours, which makes those impurities expand and break the glass <em>before<\/em> it\u2019s installed on an elevator. No one wants an elevator car mid-rise just exploding because of a tiny flaw\u2014trust me, we\u2019ve dealt with a client who skipped this step once, and it was a nightmare getting them fixed last minute. It\u2019s worth the extra cost, no question.<\/p>\n<p>Next up, laminated glass. A lot of people mix this up with tempered, but they\u2019re totally different. Laminated glass is two or more layers of glass bonded together with a thin plastic (usually polyvinyl butyral, or PVB for short) in between. So if it does break, the shards stick to the PVB layer instead of flying everywhere. That\u2019s a huge safety win, especially for taller panoramic elevators\u2014like the ones in 20+ story office buildings or hotel atriums, where the glass is way higher off the ground. If a kid leans too hard or a construction debris hits it, it doesn\u2019t just fall out. Also, laminated glass blocks a good amount of UV rays, which is great for keeping the interior of the elevator from fading (think: your phone case, or the fabric seats, not to mention if there are any signage or artwork inside). We often pair laminated with tempered for high-traffic outdoor installations too\u2014like a street-side panoramic elevator for a retail plaza. Double the strength, double the safety.<\/p>\n<p>Wait, there\u2019s also insulated glass units (IGUs) for when the elevator is in a super extreme environment\u2014like a mountain resort where temperatures swing from below zero in winter to 90\u00b0F in summer, or a coastal hotel where salt air is a constant issue. IGUs are two panes of glass (usually tempered laminated, again) with a sealed air or argon gas gap in between. That gap acts as insulation, so the elevator car doesn\u2019t get too hot in the sun or too cold in winter. Salt air is tough on metal frames, but the sealed gap also helps protect the inner glass from corrosion. We had a big ski resort project last year that required IGUs, and the client was stoked because their elevator drivers didn\u2019t have to blast the AC all day in the summer anymore, saving them money on utilities. It\u2019s a more specialized option, but it\u2019s super important for certain locations.<\/p>\n<p>Now, let\u2019s talk about the one we don\u2019t use often, but it\u2019s out there: acrylic (sometimes called plexiglass or polycarbonate) panels. Wait, why don\u2019t we love these? Sure, they\u2019re lighter and more impact-resistant than glass, but they scratch way too easily. If you put a panoramic elevator with acrylic in a busy mall or downtown area, within a few months the walls are covered in scuffs from backpacks, shopping carts, or just people touching it. They also yellow over time from UV exposure, so after a few years, the view gets all hazy. We only recommend acrylic for really low-traffic, indoor spaces, like a private residence elevator, but even then, most clients go back to glass because of clarity. Don\u2019t get me wrong\u2014acrylic has its place, but panoramic elevators, which are all about the view? Glass is non-negotiable for long-term clarity.<\/p>\n<p>I also want to mention something a lot of clients don\u2019t even think about: tinted and low-e coatings. These aren\u2019t separate glass types, but they\u2019re add-ons that go on the glass we already use. Tinted glass is just glass with a color (gray, bronze, blue) added during manufacturing, which cuts down on glare from direct sun. If you\u2019ve ever ridden an elevator in a building with a west-facing panoramic lift at sunset, you know how bright it can get\u2014tinted glass fixes that. Low-e (low emissivity) coatings are micro-thin layers that reflect infrared heat, so they keep the car cooler in the summer and warmer in the winter. That\u2019s a game-changer for elevators that run all day in direct sun\u2014we had a restaurant client tell us their waitstaff were complaining about the elevator car being too hot during lunch rushes, so we added low-e coatings, and the complaints stopped. It\u2019s a small upgrade that makes a big difference for comfort.<\/p>\n<p>Wait, let\u2019s talk about installation too\u2014because even the best glass is useless if it\u2019s put in wrong. We always make sure the glass panels are cut to exact specs, no gaps between the glass and the elevator frame, and that the sealants are high-quality, weather-resistant stuff. For panoramic elevators, the glass is usually held in place with structural silicone, not just regular caulk\u2014because that silicone is designed to hold the weight of the glass (and people leaning on it) for decades. Cutting corners on installation is the same as cutting corners on glass, so we never do that.<\/p>\n<p>Let me share a quick example to make this real: last year, we did a panoramic elevator for a mixed-use building in downtown Austin. The building is 15 stories, and the elevator runs along the side of the building, so it\u2019s exposed to Texas sun and occasional hailstorms. We spec\u2019d heat-soaked tempered laminated glass with a low-e gray tint. A month after installation, there was a small hailstorm, and a few golf-ball sized hailstones hit the elevator. A regular tempered glass would\u2019ve shattered, but the laminated held\u2014no shards, no broken glass, just a tiny mark on the outer pane that we fixed during our quarterly maintenance check. The client was so relieved, because if that had broken in the middle of a workday, it would\u2019ve shut down their elevator and caused a huge hassle. That\u2019s why we don\u2019t skip the laminated layer here.<\/p>\n<p>Now, I know a lot of people reading this might be building something new, or renovating an old building, and trying to figure out what glass is right for their panoramic elevator. At the end of the day, the best glass depends on a few things: where the elevator is installed (outdoor vs indoor, coastal vs mountain, sunny vs shaded), how much traffic it gets, and what the client\u2019s priorities are (safety, clarity, energy costs, etc.). We never push a one-size-fits-all solution\u2014we walk through each project, ask all the questions, and recommend exactly what works for that specific space.<\/p>\n<p>If you\u2019re in the market for a panoramic elevator, or even just curious about the glass in them, hit us up to chat. Whether you\u2019re an architect working on a new building, a property manager looking to upgrade old elevators, or a business owner who wants to add that wow factor to their space, we can help you pick the right glass, the right elevator, and make sure it\u2019s installed right. No pushy sales stuff, just honest advice from people who\u2019ve been doing this for years.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.daelevator.com\/uploads\/48342\/small\/medical-elevatora1d51.jpg\"><\/p>\n<p>Wait, before I go, let me recap the key glass types so you don\u2019t forget: heat-soaked tempered is the base for almost all installs, laminated is a must for safety in high-traffic or outdoor areas, insulated glass is for extreme temperature\/weather locations, and acrylic is only for low-use indoor spaces. Add tint or low-e coatings for comfort and glare control, and always work with a supplier who knows their stuff about installation too. That\u2019s the stuff that keeps panoramic elevators safe, clear, and looking good for decades.<\/p>\n<p><a href=\"https:\/\/www.daelevator.com\/residential-elevators\/\">Residential Elevators<\/a> Sources: International Building Code (IBC) Elevator Safety Standards, Glass Association of North America (GANA) Panoramic Elevator Glass Specifications, National Elevator Industry, Inc. (NEII) 2023 Equipment Safety Guidelines.<\/p>\n<hr>\n<p><a href=\"https:\/\/www.daelevator.com\/\">Ningbo Dongao Elevator Co., Ltd.<\/a><br \/>As one of the most experienced panoramic elevators manufacturers and suppliers in China, we also support customized service. We warmly welcome you to buy high quality panoramic elevators for sale here from our factory. For quotation, contact us now.<br \/>Address: No. 16 Xiapan Road, Ninghai County, Ningbo City, Zhejiang Province<br \/>E-mail: 13777289058@163.com<br \/>WebSite: <a href=\"https:\/\/www.daelevator.com\/\">https:\/\/www.daelevator.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, Sarah here, and if you\u2019ve ever ridden a panoramic elevator, you know that part &hellip; <a title=\"What are the glass types used in panoramic elevators?\" class=\"hm-read-more\" href=\"http:\/\/www.bafeivalveco.com\/blog\/2026\/10\/09\/what-are-the-glass-types-used-in-panoramic-elevators-4f51-28a2ba\/\"><span class=\"screen-reader-text\">What are the glass types used in panoramic elevators?<\/span>Read more<\/a><\/p>\n","protected":false},"author":854,"featured_media":3577,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3540],"class_list":["post-3577","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-panoramic-elevators-4da2-28e6f4"],"_links":{"self":[{"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/posts\/3577","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/users\/854"}],"replies":[{"embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/comments?post=3577"}],"version-history":[{"count":0,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/posts\/3577\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/posts\/3577"}],"wp:attachment":[{"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/media?parent=3577"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/categories?post=3577"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/tags?post=3577"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}