{"id":3524,"date":"2026-09-23T13:24:47","date_gmt":"2026-09-23T05:24:47","guid":{"rendered":"http:\/\/www.bafeivalveco.com\/blog\/?p=3524"},"modified":"2026-09-23T13:24:47","modified_gmt":"2026-09-23T05:24:47","slug":"what-kind-of-maintenance-does-hollow-composite-decking-need-4415-fe54cc","status":"publish","type":"post","link":"http:\/\/www.bafeivalveco.com\/blog\/2026\/09\/23\/what-kind-of-maintenance-does-hollow-composite-decking-need-4415-fe54cc\/","title":{"rendered":"What kind of maintenance does hollow composite decking need?"},"content":{"rendered":"

Hey there, it\u2019s Jake from our hollow composite decking team\u2014you know, the crew that\u2019s been helping folks ditch splintery wood decks for something way less hassle? Lately, I\u2019ve been fielding so many questions about this stuff I sell: \u201cJake, does hollow composite decking need maintenance?\u201d I get it\u2014when you\u2019re switching from old-school wood that demands sanding, staining, and like a dozen tools every spring, you want to make sure your new deck isn\u2019t gonna turn into another weekend chore. Let me break this down straight, no fancy jargon, and no overpromising. This is the real maintenance you actually need to do for hollow composite decking, not the fancy stuff the big brand brochures skip over. Hollow Composite Decking<\/a><\/p>\n

<\/p>\n

First off, let\u2019s cut to the chase: hollow composite decking is way lower-maintenance than wood, but that doesn\u2019t mean you can just ignore it and let it turn into a moldy mess by summer. The \u201chollow\u201d part is key here\u2014unlike solid composite, which is a dense chunk of plastic and wood fiber, our hollow stuff has air chambers running through the planks. That\u2019s why it\u2019s lighter, way easier to haul and install, and cheaper for folks covering big deck areas. But those air pockets also mean a few tiny things you can\u2019t skip, mostly related to keeping gunk out that could get trapped inside. I see way too many people think \u201chollow = no care\u201d and end up with small issues that could\u2019ve been fixed in 5 minutes. Let\u2019s start with the weekly or monthly stuff, depending on where you live.<\/p>\n

First up: surface crud and debris. This is the most basic, but it\u2019s non-negotiable. Leaves, grass clippings, food scraps from that summer BBQ\u2014all that stuff sits on your deck, gets damp, and if you leave it for weeks, it starts to mold or mildew. And here\u2019s where the hollow part matters: if that crud gets pushed into the gaps between planks, or gets packed into the tiny end caps we put on the hollow plank ends (more on those later), it can get trapped in the air chambers and turn into yucky, hard-to-scrub gunk. How do you do this? It\u2019s not a power wash every single week\u2014wait, hold up, I\u2019m not saying power wash nonstop. For regular cleanup, just grab a stiff-bristled broom and sweep your deck once a week during leaf season, or every couple of weeks when it\u2019s dry. For loose dirt and lighter stains, a mix of warm water and a little dish soap (the blue Dawn kind works great, no need for fancy deck cleaners) and a soft-bristled mop or brush is all you need. No harsh chemicals here\u2014they can strip the finish, and honestly, they\u2019re overkill. I\u2019ve seen customers use bleach once and it made their deck fade weirdly, so skip that unless you\u2019ve got super stubborn mold.<\/p>\n

Speaking of mold and mildew: that\u2019s the next big thing, especially if you live somewhere humid, like the Southeast, or near the coast where salt air and constant moisture are a thing. Wait, but\u2014our composite decking is treated with UV stabilizers and mold inhibitors, right? But that\u2019s not a forever shield. If you get a spot of mold, don\u2019t panic. For light spots, just use that same dish soap mix, scrub gently, and rinse. For darker, thicker mold (like if you left a grill cover on the deck for a month and it got damp under there), grab a composite deck-specific cleaner, not a wood deck stripper. Wood strippers are way too harsh and can eat at the composite\u2019s plastic layer over time. And important: when you\u2019re cleaning, don\u2019t let water pool on your deck. Wait, that\u2019s a big one for hollow decking\u2014because of those air chambers, if water sits for days, it can seep in through tiny scratches or gaps in the end caps and get trapped inside. How do you prevent pooling? Make sure your deck has proper slope\u2014about 1\/8 inch per foot, so water runs off. If there are low spots (like around the base of a bench or a planter you left on), move those every few months so water can drain. And never leave standing water from a sprinkler or rainstorm sitting there for more than a day or two. That\u2019s way easier than digging mold out of an air chamber later.<\/p>\n

Now, the part no one talks about: the end caps. Our hollow composite planks have little plastic end caps on the cut ends, right? Those are super important\u2014they seal off those hollow chambers so water, dirt, and bugs can\u2019t get inside. If you skip replacing or fixing end caps when they crack, you\u2019re basically giving gunk a free pass into your deck. How often do you need to check these? Once a month, especially after a storm or moving furniture. If you see a chip or a crack in an end cap, pop a new one on (we sell these super cheap, like $0.50 each, and they take 2 seconds to snap into place). Don\u2019t try to use silicone caulk as a fix\u2014silicone can peel over time, and it\u2019s hard to remove if you ever need to replace a plank. End caps are made exactly for this, so use \u2019em. That\u2019s a tiny, 2-minute check that saves you from a way bigger headache down the line.<\/p>\n

Then there\u2019s furniture and heavy stuff. If you\u2019re dragging a metal patio table or a grill across your deck without furniture pads, that\u2019s a no-no. Metal legs can scratch the surface, and if you leave a heavy piece sitting in one spot for months, especially in direct sun, it can cause a slight indent. Wait, indent? Yeah, composite is durable, but it\u2019s not indestructible. For hollow planks, which are lighter, the surface is a little softer than solid composite. So furniture pads\u2014get \u2019em, they\u2019re like $5 for a set at any hardware store. Also, moving heavy stuff: if you need to rearrange your deck, lift it, don\u2019t drag it. Even a small metal chair can scrape off the top layer, which is what protects the deck from UV rays. And if you spill something big\u2014like red wine at a party, or oil from the grill\u2014clean that up immediately. Red wine is a pigment, so if you leave it for a day, it can soak into the tiny pores of the composite (even our hollow stuff has a little texture) and stain. Grill oil is greasy, so it can attract dirt and make mold grow faster if you don\u2019t wipe it up right away. Again, no fancy cleaners here\u2014just paper towels to soak up excess, then that dish soap mix to scrub.<\/p>\n

Wait, what about power washing? I know some people swear by it, but I\u2019ve gotta warn you: power washing at too high a PSI can damage hollow composite decking. The air chambers mean the surface is a little more prone to denting or chipping if you blast it with 3000 PSI. I recommend sticking to a max of 1500 PSI for power washing, and only do it once or twice a year\u2014mostly for deep cleaning, like if you had a big cookout and the deck\u2019s got stuck-on food, or if you live near the coast and salt spray has built up. And hold the power washer at least 12 inches away from the deck surface. Too close, and you\u2019ll etch the surface or even blast a small hole in a hollow plank. Most of the time, the stiff broom and soap mix is enough\u2014save the power washing for when you really need it.<\/p>\n

Also, a quick note on seasonal maintenance, which is way less than wood. In the fall, when leaves are falling, just sweep more often\u2014maybe every 2 weeks instead of every 3, so they don\u2019t get wet and rot on your deck. In the spring, after a long winter, give it a quick once-over: check the end caps, sweep all the gunk that\u2019s been sitting under the snow or ice, and maybe a quick rinse with the hose. If you live somewhere with snow, don\u2019t use rock salt to melt ice on your deck. Rock salt is corrosive, and it can eat at the composite\u2019s finish over time. Use sand or kitty litter for traction\u2014way safer, and no damage. That\u2019s another common mistake I see people make, and it\u2019s totally avoidable.<\/p>\n

Wait, let\u2019s be real here\u2014how much time does this actually take? If you stay on top of it, it\u2019s like 10 minutes a week, a 1-hour deep clean twice a year, and that end cap check once a month. Compare that to wood, where you\u2019re spending 8 hours sanding, staining, and sealing every 1-2 years. Yeah, that\u2019s the big win with hollow composite. But I can\u2019t say \u201cno maintenance ever\u201d\u2014that\u2019s a lie. Any outdoor surface needs a little care, especially one with hollow chambers that can trap stuff if you let it.<\/p>\n

I get it, you\u2019re probably thinking, \u201cIs this worth it?\u201d Let me break it down: you buy hollow composite because it\u2019s lightweight, easy to install, doesn\u2019t splinter, and looks good year-round. The maintenance I just talked to you about is all about keeping it that way. Skip the 5-minute end cap check, and you might have to replace a plank 5 years early, which is way more expensive than buying a pack of end caps. Skip cleaning crud off the deck, and you\u2019ll have mold that\u2019s way harder to get rid of. It\u2019s all small, easy steps that add up to a deck that looks great for 15, 20 years.<\/p>\n

<\/p>\n

Now, if you\u2019re thinking about switching to hollow composite decking, or you already have yours and need a refresher on care, hit us up. We\u2019ve got all the end caps, the gentle cleaners, and the tips to keep your deck in shape. No pressure, just questions\u2014we love helping folks get the most out of their deck without the hassle of old-school wood.<\/p>\n

Hollow Composite Decking<\/a> References:<\/p>\n

    \n
  1. American Composite Manufacturers Association. (2022). Maintenance Guidelines for Composite Decking Products. ACMA Publication 22-003.<\/li>\n
  2. International Code Council. (2021). Residential Decking Material and Maintenance Standards. ICC Evaluation Service Report No. ESR-2698.<\/li>\n
  3. Outdoor Decking Industry Association. (2023). Best Practices for Hollow Composite Deck Care. ODIA Technical Bulletin 17.<\/li>\n<\/ol>\n
    \n

    LIVING GREEN<\/a>
    We’re well-known as one of the leading hollow composite decking manufacturers and suppliers in China, also support custom service. Please feel free to wholesale high quality hollow composite decking at competitive price from our factory. For more information, contact us now.
    Address: Building 1-1 West, Tangpu Industrial Park, Dishu Street, Anji County, Huzhou City, Zhejiang Province, China
    E-mail: Sheena@bosendecor.com
    WebSite:     https:\/\/www.bosen-wpc.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, it\u2019s Jake from our hollow composite decking team\u2014you know, the crew that\u2019s been helping … What kind of maintenance does hollow composite decking need?<\/span>Read more<\/a><\/p>\n","protected":false},"author":41,"featured_media":3524,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3487],"class_list":["post-3524","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-hollow-composite-decking-4988-fe8fd0"],"_links":{"self":[{"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/posts\/3524","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/users\/41"}],"replies":[{"embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/comments?post=3524"}],"version-history":[{"count":0,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/posts\/3524\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/posts\/3524"}],"wp:attachment":[{"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/media?parent=3524"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/categories?post=3524"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.bafeivalveco.com\/blog\/wp-json\/wp\/v2\/tags?post=3524"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}